800-445-9206

Support for EDS and SignCo-EDS signs and products

When installing SystemOne 3.22 software you will be asked to insert floppy, choose “Skip” at that point. Also, it will try to install an old version of Adobe and it may stop (or just hangs) around 42 percent. At this point you can cancel the installation, SystemOne has already been installed. After installing you will need to fix the “Communications Grayed Out Issue.” You also will need to know your configuration settings. If you need help with these settings please call or e-mail us.

HARDWARE SPECIFICATIONS
Operating System: Windows ME, XP, 2000
Tested and seems to work in Windows 7 and Windows 8

Disk Space: 20 Meg minimum
CD ROM Drive: Required
3.5" Floppy Drive: SKIP this part of the install then go to “Communications Grayed Out Issue.” (give us a call if you need help).
Processor: Pentium 200MHZ or better
Display: VGA or better,
Direct X 8.0 supported
Video adapter
Pointer: MS-Mouse compatible device

V4 RS232 SIGN CONTROLLER
Serial Ports: Com1 through Com 20
Baud Rates: Standard 57.6K Baud or less

V4 RADIO LINK CONTROLLER
Serial Ports: Com1 through Com 20
Baud Rates: Standard 57.6K Baud or less

V4 REMOTE SIGN CONTROLLER
Serial Ports: Com1 through Com 20
Baud Rates: 57.6K Baud
Modem: Hayes compatible

TECHNICAL SUPPORT
For more information, product support or additional
training using the SystemOne software, call (800) 445-9206